Month: June 2020

Posted on by — Leave a comment

Use Clean Nutrient Formulas In Your AutoPot Watering System With Our 3 Part AutoPot GP3 Feed Program

Our initial launch of the GP3 Feed Program

Justin Cooper, Co-Founder of GreenPlanet Nutrients talking about GP3

Simple Grow Systems Need a Simple Nutrient Program

AutoPot Watering Systems offer a simple to use automatic watering systems that can be used either as a hydroponic system or as a traditional soil irrigation system. It makes indoor and greenhouse growing easy for any grower. When working with AutoPot to learn how our plant nutrients could benefit their growers in the best way possible, we needed to understand what AutoPot users wanted from their feed program. We knew that the grow systems required extremely clean formulas with high-quality ingredients as the source of plant nutrition. We also understood that AutoPot growers wanted nutrient programs that simplified their lives, while still delivering an impressive crop.

These demands led us to develop two brand new nutrient programs specifically for AutoPot cultivators: The 2 Part Autopot Dual Fuel Feed Program and the 3 Part AutoPot GP3 Feed Program. GreenPlanet Nutrients focuses on pure nutrient formulas with readily available ingredients, making them an essential source of nutrients for any plants.

There were demands for us to make a 3 part for years, and not only making it, but making it better than what was on the market. GP3 has pure ingredients, better ratios, a more complete formula, and that’s going to give growers better results and better value. Each formula is 100% water soluble and readily available, making it easy for your plant to uptake.

Justin Cooper, Co-Founder of GreenPlanet Nutrients

A Proven Formula Tested By Growers

With proven results since its initial launch, it was no brainer to create an AutoPot Feed Program based on our 3 part base nutrient, GP3. Our Grow, Micro, and Bloom formulas have been tested and approved by veteran craft growers as their go-to 3 part nutrient in any grow medium. As mentioned, nutrients used in an AutoPot need to have a clean formula to avoid clogging the lines and AquaValves in the system. It is nothing but a headache having to isolate AutoPot Grow Modules in order to perform emergency system maintenance when problems arise because of nutrients. All 3 formulas of GP3 are 100% water-soluble, ensuring you can add it to your AutoPot Reservoir without having to worry about any build-up or clogged lines. The only thing you should worry about after feeding your plants is what’s for dinner!

With our formulas ensuring nutrients are available to the plants when they are ready to uptake them, the intuitive design of the AutoPot Watering System can function seamlessly. The AquaValve found in each module of the grow system will deliver the nutrient solution to the plant when it needs it, and with GP3, it is getting a full array of macro and micronutrients it needs at all stages of growth.

Nutrition Matters For Your Plants

GP3 Grow provides your plants with the optimal nutrients they require in the vegetative stage of growth. This stage is when your plants develop leafy green foliage and a strong root system that will be able to support flowering sites during the bloom stage. GP3 Micro contains an extensive range of ethically sourced, guaranteed micronutrients to ensure your plants are getting the highest quality fertilizer possible. These include necessary elements such as iron (Fe), boron (B) and calcium (Ca), all of which benefit the plant throughout its entire life cycle. Finally, GP3 Bloom delivers a healthy dose of phosphorous and potassium, which plants uptake in large amounts during the flowering stage of growth to product beautiful and healthy buds. All 3 formulas work together in every week of plant growth to deliver the fundamental nutrients your garden needs to thrive.

Get Growing With Our New 3 Part AutoPot Starter Kit

We wanted to make using the GP3 AutoPot Feed Program in an AutoPot Watering System as easy as possible, so we made a brand new nutrient Starter Kit to get growers started with the right fertilizers. The New 3 Part AutoPot Starter Kit comes with all the components of GP3: GP3 Grow, GP3 Bloom, and GP3 Micro. They supply your grow with the foundation of NPK and more.

You’ll also find a collection of additive and supplement nutrients in the Kit for added benefits. Our Vitathrive Propagation Solution is a comprehensive additive blend of vitamins and minerals formulated for the vegetative stage of plant growth. It is designed to reinforce plant health and support essential functions. Rezin is our aroma and flavour enhancer that greatly increases the essential oil and resin production of flowering plants. It will push size, aromas, and flavours to bring out the best qualities of your plants for a high-quality crop.

The last product is our highly effective bloom booster, PK Spike. Derived from multiple, highly soluble sources of phosphorous and potassium, PK Spike is designed to encourage budding, help facilitate bulking, and ripening of flowering plants. With large amounts of PK delivered to your plants, you’ll see earlier and more uniform crop maturity, improved flower quality, and tighter buds for a heavy harvest. PK Spike will not leave any biofilm or residue than can be problematic in an AutoPot System. It is an incredibly clean flowering additive that will help your plants thrive in an AutoPot.

It can be a struggle to find the right fertilizers to use in a grow system, especially with so many choices out there. With the GreenPlanet 3 Part AutoPot GP3 Feed Program and 3 Part AutoPot Starter Kit, we’ve ended the search and made the choice an easy one. AutoPot growers now have a clean, simple, and high-quality source of nutrients for their plants.

Download the Autopot 3 Part Feed Program

Check out our Resource Center for more product information

Read More

Posted on by — 3 Comments

Increase the weight of your harvest with Dense

Avoid loose and airy buds when using Dense in your garden

Have you ever had big, beautiful flowers after harvest, but when it came time to weight them, it wasn’t what you were expecting from your yields? You were ready for your best harvest to date with big buds, but they are not as hard and dense as you wanted them to be.

In your garden, there can be environmental factors that result in airy flowers. If the temperature around the top of your grow’s canopy is too hot, your flowers are going to loosen up resulting in an airy final product. Growers will also find that excessive levels of CO2 and hormone application can cause your yield to miss the mark on the final weight they are after.

But if you have mastered your garden environment, you are growing a healthy strain, and you have the rest of your nutrient program dialled in, you are ready to add a nutrient supplement like Dense. This is a 0-0-62 powder nutrient, delivering solely potassium (K) to your plant in late flower. When you mix Dense according to the directions, without adding any other nutrients, you can end up with a feeding solution as high as 1400 PPM of straight potassium (K). Even after one application, you will see an increase in the weight of your buds.

In 20 years of doing this, I have never seen 1400 PPM of K applied to a plant. Now that we’ve been doing it, we’re seeing great results. My clients come to me and they say, ‘That works.’

David Robinson, The Garden Sage, Author of the Grower’s Handbook

What is Dense?

Dense is our highly-concentrated potassium supplement used in the last weeks of flower. This dry fertilizer is a specially formulated blend of potassium that is used separately from your regular feeding program. Using Dense in your grow will maximize weight and bulk flowers during the bloom stage for a final crop full of dense buds.

A dry powdered nutrient used throughout the flowering stages
Can be used in these growing techniques

The power of potassium (K)

Dense is a one of a kind dry fertilizer that delivers a large dose of potassium (K) during heavy fruiting and flowering. This is completely unique from any other GreenPlanet Nutrients product we offer. Plants that are lacking in potassium during the later stages of bloom run the risk of producing airy and loose flowers. By introducing a 0-0-62 straight potassium formula to your plants, Dense ensures you get the maximum weight out of your flowers when it comes time to harvest your crop.

The results of Dense comes from the key role potassium plays in the development of flowering plants. Potassium is responsible for sugar production and the plant’s ability to store the energy it needs for healthy and vigorous flower development. It will also increase the strength of the plant at a cellular level to promote the production of sturdy stems that support large flower sites. These benefits of potassium make Dense a must use for cultivators looking to get the most out of their buds.

How do I use Dense in my grow?

Depending on your grow medium and grow system, there are 2 different ways to apply Dense:

Soil/Soilless/Coco Application: Use 1-2 grams per 1 litre (4-8 grams per 1 gallon) of water once a week. Use only in the last 3 weeks of flower, allowing at least one week for flush. Do not mix Dense with any other nutrients, mix with water only.


Hydroponic Application: Flush your nutrient reservoir of the existing nutrient solution. Add 1-2 grams per 1 litre (4-8 grams per 1 gallon) of water. Circulate in your system for up to 48 hours. Flush and then replace it with fresh nutrient solution, then repeat the following week. Use only in the last 3 weeks of flower, allowing at least one week for flush. Do not mix Dense with any other nutrients, mix with water only.

If you are a grower with your environment dialed in, plants are in good health, and looking for a simple product that guarantees your plants will produce buds with maximum weight, Dense is the supplement you have been looking for.

Check out our Resource Center for more product information

Read More

Posted on by — Leave a comment

2 Part Autopot Dual Fuel Feed Program is formulated to deliver amazing results in AutoPot Watering Systems.

Increase your AutoPot Watering System Yield Output with our Plant Fertilizers

For us at GreenPlanet Nutrients, we’ve always had a focus on innovation, simplifying gardening for growers, and pursuing partnerships with others who share these values with us. That is why we have worked with the AutoPot Team on a brand new Dual Fuel Nutrient Feed Program and Nutrient Starter Kit designed specifically for their watering systems. For new and experienced cultivators alike, dealing with mixing, pH balancing and complicated feeding schedules can often be a hassle; and in some cases, misuse of liquid nutrients can lead to the detriment of a garden in both yield and quality of the product. Our hyper-concentrated and pH-balanced Dual Fuel formula has been easing the workload in gardens for years since its release in 2016, making it the perfect match for growers already enjoying the benefits of AutoPot’s simple gravity-fed systems. With a watering system that can produce indoor and greenhouse crops with ease, there is now a GreenPlanet Nutrients Feed Program to match.

”I would strongly recommend the GreenPlanet Dual Fuel with any of the AutoPot range because it’s very, very clean. Ben at the farm, where we hold the AutoPot Summer Social, used it last year as well and sang its praises so I thought I’d give it a try as well…really nice nutrient, recommend it.”

– Jason Ralph-Smith, Managing Director at AutoPot Global

Dual Fuel for Beginners

            Dealing with liquid fertilizer for the first time is a challenge, especially when the stack of nutrients involves complicated ratios and constant pH balancing. From experience, we get how frustrating and time consuming it can be for growers. With that in mind, we designed our innovative 2 Part system to change the game forever. Dual Fuel, plain and simple, is easy to use. Whether or not you are a beginner or an expert, all you need for a successful garden is two bottles: Dual Fuel 1 & 2. Dual Fuel was designed to balance perfectly in the water at a range of 6.0 – 6.2. Although checking the pH of your nutrient solution is a good habit, it is in no way required to ensure the efficacy of your daily feeding schedule. With this attribute, our Dual Fuel feed program can save you time in your daily gardening routine and also keep your plants happy and ensure optimum nutrient uptake with an effortlessly ideal pH.

            Even more attractive to beginners is the unmatched utility of the Dual Fuel feed program. In a sense, it’s foolproof.  Our Dual Fuel feed program was formulated to be used in a 1:1 ratio with each part. So, no matter how much nutrient needs to be mixed, the ratio of Dual Fuel 1 to 2 will remain constant. This again saves the gardener time and headache, as feeding schedules are no longer required if you are only using Dual Fuel 1 & 2.

Here’s a tip: If you’re at all worried you’ve been using Dual Fuel incorrectly, check to see if both bottles have the same amount of nutrient left. If both bottles have equal amounts, you’re using the product correctly. In the case you’re over or under a few drops, don’t worry, this will not harm your plants. That’s the thing about Dual Fuel: don’t overthink – just grow!

GP Team

Dual Fuel for Experts

            If you’ve been gardening through the years, its safe to say you tried your fair share of liquid nutrient programs, and, that you’ve upgraded beyond a few plants to cultivate. Well, its time to stop searching for the perfect nutrient stack and settle on the second to none 2 Part program. Just as Dual Fuel has its advantages for beginners to the industry, these attributes are multiplied when its aggressive formula is applied to large scale operations, saving its cultivators in training, labour, and the upfront costs of liquid fertilizer.

            If you own or manage a medium to large size garden, you’re not doing it alone; there are many hands involved in producing a quality-driven, high yielding product. The overseer of a garden is responsible for many things, one of which is instructing the staff on the process of mixing and balancing liquid nutrients and water. This can often be a taxing process, filled with trial and error, multiple learning curves, upsetting crops and poor delivery on a high-quality product. However, with the Dual Fuel program in the mix, these worries are thrown to the wayside, as the pH stability and seamless mixing patterns of this product evidently attempt to flatten the learning curve of any potential master grower. In turn, these attributes will arguably speed up production time, and lead to a cleaner, happier garden.

            Furthermore, Dual Fuel 1 & 2 are hyper-concentrated, with the average application (depending on plant age, size and stage) coming in at 1.0 – 2.0 ml per litre, and with its marginally low upfront cost, this program is a dream for large scale operators looking to save on liquid nutrient. Unlike indoor gardening hardware, like lighting equipment, ventilation gear and other environmental controls, fertilizer is something that is always being purchased. Dual Fuel is a program that attempts to shorten the periods between these costly trips to your local garden supply store, as its hyper-concentration and easy mixing habits lead to less waste and more value per litre than any competitor on the market.

When growing in a gardening system designed specially to simplify the lives of cultivators, it only makes sense to use the easiest and most cost-effect nutrient program on the market as your source of plant nutrition. With our 2 Part AutoPot Dual Fuel Feed Program and 2 Part AutoPot Dual Fuel Starter Kit, growing with an AutoPot Watering System just got that much easier.

Check out our Resource Center for more product information

Read More